Overview
Description
The filter for gas particles is provided as an accessory for those applications where no additional gas filtration is performed by the user. It is designed as an inline filter which can easily inserted in the gas tubing in front of all RITTER »MultiGas« Sensors.
Please note: It is essential that particles do not enter the sensor as this will block the small openings inside the sensor.
Each sensor is supplied with one filter per gas line. The filter is inserted into the supply tube using a tube screw connection. Additional filters can be ordered from your national RITTER Distribution Partner.
Applications
- Inline particle filter
- Accessory for RITTER »MultiGas« Sensors
Features
- Low pressure drop
- Connections: Tube screw fittings for 4/6 mm tube
- Filters particles > 0.1 μm up to 99.9998%
Dimensions
Specifications
General features
Dimensions | Ø 26.4 mm x 92 mm |
Weight | 26 g |
Tube connector | 4/6 mm tube |
Flowrate | 0 – 4 ltr/min |
Application | Particle filter |
Housing volume | 110 ml |
Medium contact materials | Polyamide (housing), stainless steel (connector), FKM (O-ring) |
Exchange interval | Depends on gas contamination |
Pressure drop (mbar) @ 1 ltr/min | < 6 mbar |
Gas parameters
Operating temperature | -5 °C – 60 °C |
Storage temperature | -20 °C – 110 °C |
Max. pressure | 8 bar |
Ambient humidity | 0 – 95% rel. humidity (not condensing) |
V 1.0 / Rev. 2024-03-01 / Subject to alterations.
The most recent version of this data-sheet can be found at …
https://www.ritter.de/en/filter/
Dr.-Ing. RITTER Apparatebau GmbH & Co. KG · Coloniastrasse 19-23 · D-44892 Bochum · Germany
For questions please contact mailbox@ritter.de or your local distribution partner (on our overview page)
https://www.ritter.de/en/filter/
Dr.-Ing. RITTER Apparatebau GmbH & Co. KG · Coloniastrasse 19-23 · D-44892 Bochum · Germany
For questions please contact mailbox@ritter.de or your local distribution partner (on our overview page)