MilliGascounter MGC-1 PVDF

स्कीमेटिस डार्स्टेलुंग

दंतकथा

Performance Data

• ⁽¹⁾ Because of the physical measurement principle, the measurement error is dependent on the flow rate. The data acquisition software »RIGAMO« (accessory) provides an algorithm, which automatically recalculates the actual measurement data to the real values at the respective actual flow rate on the basis of the calibration curve. Thus, the remaining error can be reduced significantly or the flow rate range can be extended at the constant measurement error of ±3%. The remaining error is better than approx. ±1% across the full flow rate range.
• ⁽²⁾ = Nominal value; exact value will be determined by individual calibration
• ⁽³⁾ = Volume of measuring chamber
• ⁽⁴⁾ For complete MGC unit applies: With temperatures > room temperature (e.g. if placed in heating furnace) a foam formation of the packing liquid was monitored in particular cases.
• ⁽⁵⁾ The minimum gas inlet may be increased if the measurement starts with a high flow rate. In this case a higher pressure is needed until the micro capillary in the base plate is clear of packing liquid.
• ⁽⁶⁾ Because of calibration factor with 2 decimals

Model (Materials)

• Casing: पॉलीविनाइलाइड फ्लोराइड (PVDF)
• Measurement cell: पॉलीविनाइलाइड फ्लोराइड (PVDF)

Standard Equipment

• 8-digit Totalizing Roller Counter
• Bubble level for levelling
• Level and Levelling Feet
• Multi-Chamber Measuring Drum
• Supports for Thermometer and Manometer
• Viton sealing
• ड्रम और काउंटर को मापने के बीच चुंबकीय युग्मन: बिल्कुल तरल-तंग आवरण

Accessories

• एचसीएल समाधान 1.8 वोल्ट%
• Available quantities: 100 / 200 / 500 / 1,000 / 5,000 ml
• पैकिंग तरल Silox
• Filter 0.45 micron for gas inlet tube
• Filter-Check Valve Combination
• Back-pressure valve for gas inlet tube

V 3.4 / Rev. 2023-03-09 / Subject to alterations.