Filter-Check Valve Combination · डाटा शीट
During measuring operations with the RITTER MilliGascounter, the gas inside the counter flows through a capillary with an inner diameter of 0.4 mm. Particles and other contaminations can block this thin capillary. To prevent any possible blockage, a Filter-Check Valve Combination can be provided by RITTER.
The Filter-Check Valve Combination consists of the following parts:
From left to right:
This combi module is delivered in a pre-mounted configuration:
The arrow indicates the gas flow direction.
The module must be installed in the gas tube in front of the MilliGascounter. Simply push the tube coming from the gas source onto the left hose barb. Push another (short piece) of tube onto the right hose barb and connect this tube to the MilliGascounter according the MGC Manual.
For replacement parts please check with your national Distributor or RITTER directly.
V 2.0 / Rev. 2023-03-15 / Subject to alterations.
Dr.-Ing. RITTER Apparatebau GmbH & Co. KG · Coloniastrasse 19-23 · D-44892 Bochum · Germany
For questions please contact firstname.lastname@example.org or your local distribution partner (on our overview page)